Produits Osmonics-Desal

AD - Sea water membranes AD membrane elements are characterized by a very good sodium chloride rejection. AD Seawater Elements feature high-pressure construction. AD 1600 AD 4040FM HR AD 2540FF AD 440 AD 365 AD 440 LE AD 400 AD 8040F AD 400  34 AD 8040F HR AD 400 LE AD 8040F 400 HR AD 4040FF AD 90 AD 90 LE

AE - High Rejection High Flow Seawater RO Elements

AE - High Rejection Low Energy Seawater RO Elements

AG - Brackish water membranes

AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psi are desired. These elements allow moderate energy savings, and are considered a standard in the industry.

Serie AG-HR

AG LF - High Rejection Low Fouling Brackish water RO Elements

AG 2PASS - Standard Brackish Water Elements for 2 Pass RO Systems

AG - Brackish water membranes High Rejection

AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psi are desired. These elements allow moderate energy savings, and are considered a standard in the industry.

AK - Low Energy Brackish Water RO Elements

AK elements are selected when high rejection and low operating pressures are desired. These elements allow significant energy savings since good rejection is achieved at low operating pressures.

AK - High Rejection Low Energy Brackish Water RO Elements

AK - High Flow Very Low Energy Brackish Water RO Elements

AP - Extreme Low Pressure Brackish Water RO Elements

Certified Elements - NSF 61 Certified Drinking Watern RO and NF Elements

CD & CE Series

The C series elements have a higher rejection and better chemical stability than standard cellulose acetate and they offer a lower cost per element and increased chlorine resistance compared to thin-film elements.

CG & CK Series

Dairy Processing USDA - Accepted Sanitary RO8038C

Dairy AF Series

DK Series

DK-Series-1
DK-Series 2

DL - Industrial High Flow Nanofiltration Elements

Duraslick Series

Duraslick is a family series of membrane elements engineered for use with fouling-prone brackish water applications. Duraslick is designed to utilize an innovative three-layer membrane, of which a proprietary middle layer creates extreme smoothness, and provide a high rejection of salts.

Duraslick HS Series

Duraslick HS elements are specially designed for comparatively higher suspended solids levels.

Duratherm HWS Series

The Duratherm RO HF Series is specifically designed to maximize the benefits of continuous high temperature operation as well as hot water sanitization for industries willing to maximize energy recovery and use hot purified water. Separation system sanitization protocol is performed via periodic exposure to temperature as high as 90°C at minimum feed pressure to kill microorganisms by denaturation and coagulation of the proteins chains.

The Duratherm HWS RO and HWS NF are suitable for separation systems purifying water at temperature up to 122°F (50°C), Duratherm HWS UF up to 158°F (70°C) in low crossflow environment and no suspended solids.

EW Series

The EW family of elements should be selected when pretreatment is in need to keep a reverse osmosis or a nanofiltration system running. EW will remove suspended solids and other known foulants.

GM Series - Industrial Ultrafiltration Elements

HL Series - Nanofiltration membranes

HL Nanofiltration Elements are used for water softening, color removal, and reduction of THM formation potential.

Hollow Fiber Membranes

JW Series - Industrial Ultrafiltration Elements

JX Series - Industrial Stream Clarification MF Element

Maple Series

Muni NF Series - Membrane Elements for Minicipal Drinking Water Plants

Muni RO LE Series - Membrane Elements for Minicipal Drinking Water Plants

Muni RO Series - Membrane Elements for Minicipal Drinking Water Plants

OSMO BEV Reverse Osmosis Series - Beverage and Bottled Water Production

OSMO PHARMA Elements

PRO RO Series - Standard Brackish Water RO Elements

Desal 1220990

HL4040TF